D15/17 Form Tie Rod
D15/17 all-thread rod (DW15, 17/10 profile), 1.47–1.50 kg/m, tested tensile 110–180 kN by material.
View Details →Factory Direct · Handan, Hebei, China
Formwork Fasteners Manufacturer in China
You're Already Talking to the Factory.
In-house CNC production of tie rods, water stop systems, cones and anchors, to DIN and ISO standards. Non-standard sizes made to your drawing.
ISO 9001 / 14001 / 45001DIN Standard SpecsIn-House CNC MachiningNon-Standard Sizes to DrawingOEM / ODM Welcome
- 18+
- Years in Formwork Fasteners
- 48+
- Export Countries
- 3 Days
- Stock Lead Time
Manufacturer
Qianheng — Formwork Fasteners Manufacturer
Qianheng (Handan Yongnian District Qianheng Fastener Co., Ltd.) is a factory-direct manufacturer of concrete formwork fasteners in Yongnian District, Handan City, Hebei Province — a major fastener manufacturing center in China.
- In-house production: tie rods, water stop systems, climbing cones, anchors, nuts and washers made on our own lines
- Production to DIN and ISO thread standards, with non-standard sizes welcome
- OEM and custom manufacturing from your drawing or specification
- Certified to ISO 9001, ISO 14001 and ISO 45001 management system standards
Product Range
Formwork Fasteners We Manufacture In-House
Direct links to the product pages you are most likely to specify. Standard sizes in stock, non-standard parts made to your drawing.
D20/22 Form Tie Rod
D20/22 all-thread rod, 2.60 kg/m, tested tensile 210–240 kN by material.
View Details →
Climbing Cone Assembly
Cone + sleeve + anchor set for climbing and slipform, tolerance ±0.5 mm.
View Details →
H20 Beam Connector
Joins H20 timber beam ends with clear load transfer and fast installation.
View Details →
BFD Alignment Clamp
Aligns and locks the joint between two steel frame panels; wedge-driven, keeps the panel face flat.
View Details →
Embedded Tie Rod Assembly
Transfers one-side formwork load to embedded anchors in the cured structure.
View Details →
Square Base Plate
Hot-dip galvanized base plates with matched anchor sets for foundations.
View Details →
Precision Rolled Tie Rod
Precision rolled tie rod with continuous rolled thread, tested tensile up to 180 kN; cut to your length.
View Details →
Mountain Nut (Wing Nut)
Wing-type mountain nut for hand-tight fastening of formwork ties.
View Details →
For Procurement Managers Only
Are You a Procurement Manager? Then Let's Talk Specs.
We are a B2B fastener factory, not a retailer. If you are sourcing for an engineering project, send the parameters on the right and receive an engineering-reviewed quote within 24 hours.
Buying a few pieces for a repair job?We supply project-scale orders. For retail quantities, please contact your local distributor.
What we need from youFaster quote = complete spec
01
Material Grade
Q235, 45# steel, 40Cr, stainless 304/316...
02
Strength Class
4.8, 8.8, 10.9 or your design load
03
Thread Spec
D15 / D20, thread pitch, length tolerance
04
Surface Finish
Black oxide, electro or hot-dip galvanizing
05
Quantity
Pieces, sets, or container volume
06
Send My ParametersDrawing or Sample
PDF / DWG / DXF, or a physical sample
Material Selection Guide
Spec Right the First Time: A Fastener Material Guide
The single biggest source of order errors is a vague specification. Use this checklist when you send us your requirements.
Tie Rods & Water Stop Rods
- Material
- Q235 · 45# steel · 40Cr
- Strength
- 4.8 / 8.8 / 10.9
- Finish
- Black oxide · Electro-galv. · Hot-dip galv.
- Use
- Slab, wall and retaining-wall formwork; waterproof walls with five-section rods
Climbing Cones & Sleeves
- Material
- PP / PVC + steel core
- Strength
- Tolerance ±0.5 mm
- Finish
- Matched to your system brand
- Use
- Climbing, slipform and single-sided formwork systems
Anchors & Embedded Parts
- Material
- Q235 · 45# steel
- Strength
- 8.8 / 10.9 available
- Finish
- Hot-dip galvanized, HDG thickness per spec
- Use
- Foundations, solar farms, precast and wind projects
Nuts, Washers & Accessories
- Material
- 45# steel · Stainless 304
- Strength
- DIN 934 / DIN 125 classes
- Finish
- Per project spec
- Use
- Matching accessories to complete the BOM in one order
Why Orders Go Wrong
6 Order Mistakes That Cost Procurement Teams Time and Money
These are the failures we see most often in formwork fastener imports, and the controls we build into every order to stop them.
01
Tolerance drift on tie rod length
Our control: CNC cutting with 100% gauge checks; a dimensional report is sent before shipment.
02
Mixed or missing parts on site
Our control: BOM-based kit packing. Every case is marked to your drawing, so the crew matches parts in minutes.
03
Threads that do not fit on site
Our control: CNC thread rolling plus go / no-go gauge inspection on every batch.
04
Coating thickness below spec
Our control: Salt-spray tested finishes, with a batch coating report included in the shipment.
05
Lead time slipping on large orders
Our control: Raw material stock and a weekly production plan shared with key accounts.
06
Rust and damage in transit
Our control: Seaworthy export packing: pallet, steel strapping, waterproof wrap, and container loading photos.
A Fixed Process, From Spec to Shipment
8 Steps Between Your Specs and the Port
Procurement decisions get easier when every step is predictable. This is exactly how every Qianheng order runs.
01Day 0
Send Specs or Drawing
Email, WhatsApp, or the form below. PDF / DWG / DXF, or a physical sample.
02Within 24h
Engineering Review
Our engineers check dimensions, grade, thread and finish against your drawing.
03Day 1-2
Quotation
FOB / CIF / CFR / EXW pricing with payment terms (T/T, L/C).
04Day 5-10
Sampling
Pre-production samples for approval on custom items.
05Signed off
Sample Approval
You approve the sample; production starts on your confirmation.
06Stock 3d / Custom 7-15d
Production + QC
In-process checks, batch testing, and a dimensional report.
07Day before shipping
Export Packing
Pallet + steel strapping + waterproof wrap, marked per your BOM.
08On schedule
Shipping
Container loading photos and packing list delivered to you.
Frequently Asked Questions
Answers Procurement Teams Ask Before Ordering
MOQ depends on the item and specification. Stock items accept small trial orders, and mixed-SKU orders are welcome, so you can test a little of everything in one shipment.
Get Your Quote
Send Your Specifications. Get an Engineering-Reviewed Quote.
Fill in the parameters you have. If anything is missing, our engineers will ask the right questions and come back to you within 24 hours.
Trade terms at a glance
- Payment
- T/T · L/C at sight (large orders)
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
- Currencies
- USD · EUR · RUB · TRY · AED · SAR
- Lead time
- Stock 3 days · Custom 7-15 days
- Support
- PDF / DWG / DXF drawings welcome
Prefer to talk directly?WhatsApp: +86 132 8318 9755
FACTORY TOUR
See Inside Our Fastener Factory
A walkthrough of our 5,000 m2 plant in Handan - thread rolling, CNC machining, welding, stock and packing.