Walers Formwork
Walers baja dengan lubang pasak yang sudah diproduksi untuk formwork dinding.
Langsung dari Pabrik
CNC Sendiri
Laporan QC Batch
OEM ke Gambar
1 / 3Aksesori Lain
Walers Formwork
Welded twin-channel steel waling (double 10# or 12# channel; 50mm flange, 53mm web gap) with pre-punched tie-rod holes and alignment marks. Typical capacity: bending moment 11.54 kN·m and shear 84.81 kN per waling; lengths from 1.5m to 6m, custom hole patterns per drawing. Q235 steel, zinc plated or painted.
Spesifikasi
- Twin 10#/12# channel welded construction
- 11.54 kN·m bending / 84.81 kN shear typical
- Pre-punched tie-rod holes
- Lengths 1.5–6m
- Zinc plated or painted
Harga diberikan berdasarkan spesifikasi produk, bahan/grade, kuantiti, destinasi dan keadaan pasaran semasa. Hubungi kami untuk penawaran terkini.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Section | Twin 10#/12# channel, welded |
| Capacity | Bending 11.54 kN·m; shear 84.81 kN (typical) |
| Length | 1.5–6m |
| Holes | Pre-punched per system layout |
| Material | Q235 steel (yield 235MPa) |
| Surface | Zinc / painted / HDG |
BahanQ235 / 45# steel
Finishing PermukaanPlain (black) · Painted · Hot-dip galvanized
Beban TerukurBeam element — see waler span table
Berat UnitDepends on section — confirm against drawing
PengemasanBundled with steel strapping · marked per BOM
Proses Produksi
01
02
03
04
05
06Jelaskan Grade Bahan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Send formwork drawing for hole punching layout
- Confirm section size with panel width and rod spacing
- Specify surface finish for your environment
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pengiriman
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikat tali + tahan air
- Pembayaran
- T/T · L/C saat tiba
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
Soalan Teknikal Lazim
Walers Formwork — Jawapan untuk Jurutera dan Pembeli
A formwork tie rod is a high-strength threaded bar that, together with nuts, anchor plates and walers, holds formwork panels against the lateral pressure of fresh concrete. It passes through the wall section and is either fully recovered after stripping (through-tie used with a sleeve) or permanently embedded (lost-end / water-stop type).