Penyambung Acuan
Penyambung untuk menyambung tiub cerucuk dan sokongan acuan.
Langsung dari Pabrik
CNC Sendiri
Laporan QC Batch
OEM ke Gambar
1 / 3Aksesori Lain
Penyambung Acuan
A steel coupler for joining scaffold tubes and formwork props. Available in slip and swivel types for bracing and support connections in formwork and falsework.
Spesifikasi
- Joins scaffold tubes and props
- Pressed steel construction
- Various tube diameters available
- Slip or swivel type
Harga diberikan berdasarkan spesifikasi produk, bahan/grade, kuantiti, destinasi dan keadaan pasaran semasa. Hubungi kami untuk penawaran terkini.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Type | Slip / swivel |
| Material | Q235 steel |
| Surface | Galvanized / painted |
BahanQ235 steel
Finishing PermukaanGalvanized · Painted
Beban TerukurInquire
Berat UnitInquire
PengemasanBundled on pallet
Proses Produksi
01
02
03
04
05
06Jelaskan Grade Bahan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Specify tube diameter
- Confirm slip or swivel type
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pengiriman
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikat tali + tahan air
- Pembayaran
- T/T · L/C saat tiba
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
Soalan Teknikal Lazim
Penyambung Acuan — Jawapan untuk Jurutera dan Pembeli
Formwork tie rods are commonly produced from medium and high carbon steel in 8.8 and 10.9 property classes. For corrosion protection: hot-dip galvanizing gives the thickest coating and suits outdoor and marine exposure; Dacromet (zinc-flake) coating avoids hydrogen embrittlement and is preferred for high-strength grades; electro-galvanized is an economical option for general use; black oiled bar is used indoors or where the rod is recovered and reused quickly.