Katalog Produk 2026 kini tersedia
QIANHENGFORMWORK FASTENER FACTORY
Dapatkan Penawaran

Laman Utama / Foto Tapak

Foto Tapak

Foto sebenar dari tapak binaan di mana pengikat acuan kami dipasang. Tiada gambar stok, tiada render.

Sistem Batang Pengikat Acuan Dinding

Panel dinding menegak dipegang oleh batang pengikat D15 atau D20 dengan nat sayap dan waler, serta penyambung kon di mana batang perlu dikembalikan. Foto menunjukkan susunan sudut, larian pengikat di bahagian atas dan jarak pengikat yang mengekalkan rata permukaan panel di bawah tekanan tuangan.

Workers installing tall wall formwork panels
Wall formwork corner with walers and tie rods
Overhead view of wall formwork tie fasteners
Long retaining wall formwork assembly
Column formwork corner with through tie rods, square bearing plates and wing nuts
Column formwork braced with steel double-channel walers and tie rods
Column formwork erected around a rebar cage, held by push-pull props

Acuan Satu-Sisi dan Sokongan

Di mana satu permukaan dinding tidak dapat diakses, acuan disokong dari satu sisi sahaja menggunakan angker terbenam dan grid sokongan padat. Foto menunjukkan corak sokongan, penyambung panel dan susunan angker yang menanggung beban tuangan.

Single-sided retaining wall formwork bracing
Dense single-sided formwork bracing grid
Single-sided formwork panel connectors
Single-sided wall formwork on triangular brackets with a working platform
Long single-sided wall formwork supported by a row of raking props

Pengikat, Angker dan Butiran Tapak

Imej dekat batang pengikat, plat angker, sangkar tiang dan pengendalian di kawasan simpanan. Komponen-komponen inilah yang menentukan sama ada panel sejajar: keadaan ulir, kedudukan plat, penyingkiran kon dan urutan panel di dalam tumpukan.

Form tie rods and anchor plates close-up
Column formwork with rebar cage
Workers assembling timber formwork
Formwork panels stacked in yard with crane
Wing nut and square bearing plate seated on a formwork tie rod
Wedge clamp locking a formwork panel against a steel frame
Waler locking clamps gripping aluminium beams on a formwork panel

How a project is delivered

The same route every order takes, whether it is one pallet of stock nuts or a full set of custom tie rods for a wall programme.

  1. 1

    Send the requirement

    Drawing, spec sheet or a written list: diameter or thread, length, class, finish and quantity per size.

  2. 2

    Technical review

    We check the dimensions against the thread and material class, flag anything that cannot be rolled or will not assemble, and confirm the drawing back to you.

  3. 3

    Quotation

    Priced by size and finish, with packing and lead time stated. No price is quoted without a confirmed specification.

  4. 4

    Sample and approval

    For non-standard parts, a sample is made and gauged before the production run starts.

  5. 5

    Production and inspection

    Thread gauging, hardness, tensile and coating checks with batch records, plus third-party inspection where the contract requires it.

  6. 6

    Packing and shipping

    Set or BOM packing, VCI protection, seaworthy crates, then documents: mill certificate, batch test report, packing list and invoice.

What to send us for a priced answer

  • Product and drawing reference, or a clear description of the part
  • Diameter or thread form, and the overall length
  • Property class or required rated capacity
  • Surface finish with a thickness range if corrosion life matters
  • Quantity per size, and whether it repeats
  • Packing requirement and destination port or site
  • Certification required, for example EN 10204 3.1
  • Target delivery date and whether it is a stock or custom item

Documents that ship with the goods

  • Mill certificate for the heat used (EN 10204 3.1 on request)
  • Batch tensile test record matched to the heat number on the rod
  • Coating thickness record where a coating is specified
  • Packing list with bundle weights and crate marks