Papan Dasar Kotak
Papan dasar galvanis hot-dip dengan set baut terbenam yang sesuai untuk fondasi.
Langsung dari Pabrik
CNC Dalam Pabrik
Laporan Pengujian Batch
OEM Berdasarkan Gambar
1 / 3Aksesori Lainnya
Papan Dasar Kotak
Hot-stamped square plate washer per DIN 436 practice, in standard 100×100×8mm (and 50×50, 120×120) sizes with hole diameters matched to D15/D20/D26.5 rods. Dome and flat variants available; weight 390–640g depending on size. Spreads clamping force and prevents panel damage on plywood and steel formwork.
Spesifikasi
- 100×100×8mm standard (50×50 / 120×120 options)
- Hole matched to D15–D26.5 rods
- Hot-stamped carbon steel
- Flat or dome profile
- Plain, zinc or HDG
Harga ditawarkan berdasarkan spesifikasi produk, material/grade, jumlah, tujuan, dan kondisi pasar saat ini. Hubungi kami untuk penawaran terbaru.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Size | 100×100×8mm standard |
| Hole | Ø10–Ø30 per rod |
| Material | Carbon steel, hot-stamped |
| Profile | Flat or dome (waler plate) |
| Weight | 390–640g per size |
| Surface | Plain / zinc / HDG |
BahanQ235 / 45# steel plate
Finishing PermukaanHot-dip galvanized (45-85 µm) · Plain
Beban TerukurGoverned by anchor assembly — see drawing
Berat Unit120 × 120 mm plate: 0.98 kg per piece
PengemasanCartons on pallet · marked per BOM
Proses Produksi
01
02
03
04
05
06Jenis Bahan Dijelaskan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Choose plate size by rod force and panel material
- Always use under nuts on timber panels
- Confirm hole diameter matches your rod
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pemesanan
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikatan + tahan air
- Pembayaran
- T/T · L/C saat ini
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
FAQ Teknis
Papan Dasar Kotak — Jawaban untuk Insinyur dan Pembeli
A formwork tie rod is a high-strength threaded bar that, together with nuts, anchor plates and walers, holds formwork panels against the lateral pressure of fresh concrete. It passes through the wall section and is either fully recovered after stripping (through-tie used with a sleeve) or permanently embedded (lost-end / water-stop type).