Cincin Plum
Cincin plum (bergerigi) yang mengunci baut cakram melawan getaran.
Langsung dari Pabrik
CNC Dalam Pabrik
Laporan Pengujian Batch
OEM Berdasarkan Gambar
1 / 3Aksesori Lainnya
Cincin Plum
Heat-treated spring steel washer with a lobed inner profile that bites into the rod thread, maintaining nut preload during concrete vibration. The flower-shaped body also spreads load on the panel. Anti-rust finish; standard sizes for D15/D20 tie rods.
Spesifikasi
- D15 / D20 tie rods
- Lobed thread-gripping profile
- Heat-treated spring steel
- Anti-loosening under vibration
- Anti-rust finish
Harga ditawarkan berdasarkan spesifikasi produk, material/grade, jumlah, tujuan, dan kondisi pasar saat ini. Hubungi kami untuk penawaran terbaru.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Thread | M15 / M20 |
| Material | Heat-treated spring steel |
| Function | Thread-gripping anti-loosening washer |
| Surface | Phosphate / zinc |
| Packaging | Bulk bags |
BahanQ235 / 45# steel
Finishing PermukaanPlain (black) · Zinc plated
Beban TerukurBearing element — rated by system load
Berat UnitSquare washer 120 × 120: 0.98 kg · channel washer 60 × 140: 0.7 kg
PengemasanCartons on pallet · marked per BOM
Proses Produksi
01
02
03
04
05
06Jenis Bahan Dijelaskan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Use one washer per nut on vibration-exposed joints
- Confirm inner hole matches rod diameter
- For HDG rods, choose zinc washers to avoid galling
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pemesanan
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikatan + tahan air
- Pembayaran
- T/T · L/C saat ini
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
FAQ Teknis
Cincin Plum — Jawaban untuk Insinyur dan Pembeli
Tie spacing is governed by the maximum lateral pressure of fresh concrete, which depends on pour rate, concrete temperature, slump and wall height, plus the allowable load of the rod, the waler and the panel facing. Spacing must be calculated per pour, not copied from a previous project.