Nat Gabungan (Rama-Rama)
Nat rama-rama digabungkan dengan cakera untuk pengikatan batang pengikat satu-bahagian.
Langsung dari Pabrik
CNC Sendiri
Laporan QC Batch
OEM ke Gambar
1 / 9Baut Padan Rod Pengikat
Nat Gabungan (Rama-Rama)
A butterfly nut combined with an integrated disc, giving a one-piece fastener for tie rods. Fewer parts on site and faster assembly than separate nut and washer.
Spesifikasi
- One-piece nut and disc
- Butterfly hand tightening
- Fits D15 / D20 threads
- Reduces parts count
Harga diberikan berdasarkan spesifikasi produk, bahan/grade, kuantiti, destinasi dan keadaan pasaran semasa. Hubungi kami untuk penawaran terkini.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Thread | D15 / D20 |
| Material | 45# steel / cast |
| Surface | Zinc plated / black |
Bahan45# steel / cast
Finishing PermukaanZinc plated · Black
Beban TerukurInquire
Berat UnitInquire
PengemasanCartons on pallet
Proses Produksi
01
02
03
04
05
06Jelaskan Grade Bahan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Confirm thread size
- Order to reduce on-site parts
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pengiriman
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikat tali + tahan air
- Pembayaran
- T/T · L/C saat tiba
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
Soalan Teknikal Lazim
Nat Gabungan (Rama-Rama) — Jawapan untuk Jurutera dan Pembeli
Tie spacing is governed by the maximum lateral pressure of fresh concrete, which depends on pour rate, concrete temperature, slump and wall height, plus the allowable load of the rod, the waler and the panel facing. Spacing must be calculated per pour, not copied from a previous project.