Baut Cakram
Baut cakram untuk ujung pasak, sesuai ulir DIN, tegangan tinggi.
Langsung dari Pabrik
CNC Sendiri
Laporan QC Batch
OEM ke Gambar
1 / 15Baut Padan Rod Pengikat
Baut Cakram
Cast iron / ductile iron tie nut with flat bearing face rated to about 180 kN for rolled and hot-rolled tie rods. Standard sizes D12/D15/D20 with nut body diameters from D90 to D120, optional welded washer plate for heavy-duty systems, plain or galvanized.
Spesifikasi
- D12 / D15 / D20 tie rods
- ~180 kN rated bearing
- Flat machined face
- Optional welded washer plate
- Plain or zinc plated
Harga diberikan berdasarkan spesifikasi produk, bahan/grade, kuantiti, destinasi dan keadaan pasaran semasa. Hubungi kami untuk penawaran terkini.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Thread | M12 / M15 / M20 |
| Material | Cast iron / ductile iron |
| Rating | ~180 kN |
| Body O D | D90 / D100 / D110 / D120 |
| Surface | Plain / zinc / HDG |
| Packaging | Bulk or pre-counted bags |
Bahan45# steel (QT450-10 ductile iron for some sleeve-type parts)
Finishing PermukaanPlain (black) · Zinc plated
Beban TerukurMatched to tie rod class — D15 system 150 kN, D20 system 230 kN
Berat UnitD20 × 50 × 110 disc nut: 0.92 kg · D15 × 100 disc: 0.53 kg
PengemasanCartons on pallet · marked per BOM
Proses Produksi
01
02
03
04
05
06Jelaskan Grade Bahan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Match nut body size to your panel hole and rod load
- Use with square base plate on timber panels
- For heavy loads, request the welded washer plate version
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pengiriman
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikat tali + tahan air
- Pembayaran
- T/T · L/C saat tiba
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
Soalan Teknikal Lazim
Baut Cakram — Jawapan untuk Jurutera dan Pembeli
It consists of two reusable outer threaded bars, two plastic cones and one embedded middle bar with a welded water-stop plate. After stripping, the two outer bars are unscrewed and reused on the next pour; only the middle section stays inside the wall. This keeps consumable cost low while producing a watertight wall penetration.