Kaki Sokongan Laras
Kaki boleh laras untuk sokongan acuan dan pelarasan struktur sementara.
Langsung dari Pabrik
CNC Sendiri
Laporan QC Batch
OEM ke Gambar
1 / 6Baut, Cincin dan Aksesori
Kaki Sokongan Laras
A screw-type adjustable leg for leveling formwork props and falsework. The threaded adjustment gives fine height control for slab and falsework support.
Spesifikasi
- Screw-type height adjustment
- For props and falsework
- Various sizes available
- Load per system (Inquire)
Harga diberikan berdasarkan spesifikasi produk, bahan/grade, kuantiti, destinasi dan keadaan pasaran semasa. Hubungi kami untuk penawaran terkini.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Material | Q235 / 45# steel |
| Adjust | Screw type |
| Surface | Galvanized / painted |
BahanQ235 / 45# steel
Finishing PermukaanGalvanized · Painted
Beban TerukurInquire
Berat UnitInquire
PengemasanBundled on pallet
Proses Produksi
01
02
03
04
05
06Jelaskan Grade Bahan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Confirm required adjustment range
- Check load with system supplier
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pengiriman
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikat tali + tahan air
- Pembayaran
- T/T · L/C saat tiba
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
Soalan Teknikal Lazim
Kaki Sokongan Laras — Jawapan untuk Jurutera dan Pembeli
Tie spacing is governed by the maximum lateral pressure of fresh concrete, which depends on pour rate, concrete temperature, slump and wall height, plus the allowable load of the rod, the waler and the panel facing. Spacing must be calculated per pour, not copied from a previous project.