Klem Berat
Gaya penguncian tinggi untuk formwork berat dan elemen precast besar.
- High clamping force
- For heavy formwork and large precast elements
- Stable, reliable structure
Baut & Bagian Terbenam
Klem pengunci, klem kolom, klem berat, klem cepat, kait brace, cincin persegi TP, konektor rangka, set pin dan pengunci, perakitan batang pengikat 3 bagian, dan kunci waling.
Sistem rangka baja dijaga bersama oleh bagian-bagian kecil pengunci. Seri ini mencakup klem pengunci yang mengunci panel ke waling, klem kolom dan klem berat, klem cepat lepas, kait kembali brace, cincin persegi TP, konektor rangka, set pin-pengunci, serta perakitan batang pengikat 3 bagian dan perakitan kunci waling. Bentuk dan ukuran khusus dapat dibuat sesuai gambar Anda.
Klem Kolom
Klem dapat disesuaikan dan bisa digunakan kembali untuk perakitan formwork kolom cepat.
- Quick clamping of column formwork
- Adjustable and reusable
- Holds accurate column dimensions
Klamp Penyesuaian BFD
Menyesuaikan dan mengunci sambungan antara dua panel kerangka baja; menggunakan sistem pendorong bilah, menjaga permukaan panel tetap rata.
- Fits Trio-type steel frame panel profiles
- Aligns and locks the panel-to-panel joint
- Steel driving wedge, no spanner needed
Klamp Penyesuaian BFD (Ditempa, Besar)
Klamp BFD baja ditempa untuk sambungan panel yang lebih berat; sistem pengunci bilah dengan celah hook yang lebar.
- Pressed steel plate body, male-and-female wedge locking jaw
- For steel frame panel to waler and rib-profile clamping
- Helps prevent grout loss at panel joints
Klamp Penyesuaian BFD (Ditempa, Kecil)
Klamp BFD ditempa ringkas untuk sambungan tepi, sudut internal, dan panel pendek.
- Same wedge locking construction as the large size
- Smaller and lighter for identical duty
- For narrow positions: edge beams, internal corners, panel frames
Klem Wedge Besi Cor
Badan besi cor untuk posisi waling utama dan strong-back; kekakuan tinggi.
- Cast iron body: high clamping force and rigidity
- For primary waler and strong-back positions
- Custom-shaped wedge clamps cast to your drawings
Cincin Persegi TP
Menyebar beban penguncian dan melindungi panel; TP1010 / TP1212 / TP1515.
- Spreads clamping load and protects panel faces
- Standard TP1010 / TP1212 / TP1515
- Custom sizes available
Klem Cepat Formwork
Perakitan dan pembongkaran formwork cepat, meningkatkan efisiensi di lokasi proyek.
- Fast assembly and disassembly
- Improves on-site efficiency
- Simple operation
Konektor Rangka
Menyambung sistem scaffolding dan formwork dengan transfer beban jelas.
- Joins scaffold and formwork systems
- Clear load transfer
- Easy installation
Perakitan Kunci Waling
Batang pengikat, baut kunci, dan cincin tekan mengunci waling ke formwork.
- Tie rod + lock nut + pressure plate
- Clamps waling to the formwork evenly
- Increases overall stiffness
Small parts that decide whether a frame stays square
Steel and aluminium frame systems are only as stiff as their locking parts. Alignment clamps hold the panel-to-panel joint flush before the pour, wedge clamps lock panels back to the walers, column clamps square and brace a column form, heavy duty clamps take the higher loads on large panels, quick clamps speed stripping on high-turnover sites, brace return hooks tie the brace back to the frame, and pin-and-wedge sets lock the corners. One missing or loose clamp shows up as a bulge or a blown joint — which is why these parts are bought by the hundred, not by the piece.
Fit the profile, then the load
Clamps are profile-specific before they are load-specific: the BFD alignment clamp fits Trio-type steel frame panel profiles, and other clamps are matched to the panel flange depth and the waler section on your drawing. Drive type matters for labour cost — a steel driving wedge needs no spanner and strips faster than a bolted clamp. Column clamps are sized to the column section and the pour height. For aluminium systems the cast wing nut in QT450 with a 120×120 mm plate carries around 180 kN breaking load, and the lighter 100 mm version around the same load at 530 g. Send the panel profile or a photo and we match the clamp to it rather than to a generic size.
Volume, spares and packing
These parts are consumables on site, so most orders are by the hundred or the thousand. Standard clamps and wedges ship from stock in about three days; special profiles and castings made to drawing take 7–15 days. Castings are QT450-10 ductile iron with a black or electro-galvanized finish. Because a missing clamp stops a pour, we recommend ordering 5–10% spares with the main quantity, and mixed clamp-and-wedge orders are consolidated into one pallet so the site store receives a complete set.
FAQ Teknis
Baut & Bagian Terbenam — Jawaban untuk Insinyur dan Pembeli
A formwork tie rod is a high-strength threaded bar that, together with nuts, anchor plates and walers, holds formwork panels against the lateral pressure of fresh concrete. It passes through the wall section and is either fully recovered after stripping (through-tie used with a sleeve) or permanently embedded (lost-end / water-stop type).