قضيب مانع تسرب خماسي

Name: قضيب مانع تسرب خماسي
Brand: Qianheng Fastener
Availability: InStock

قسم وسطي قابل للإزالة للجدران المائية؛ ملحقات PVC مطابقة.

مباشرة من المصنع

تصنيع CNC داخلي

تقارير دفعات

OEM حسب الرسم

1 / 3

قضبان الشد ومانع التسرب

قضيب مانع تسرب خماسي

The five-section design leaves the water stop plate embedded in the wall while the outer cones and threads are recovered after concreting, eliminating through-hole leak paths. Water stop plates are supplied welded (e.g. 120×120mm sheet or Ø65mm round) in fixed or movable types for D14/D15/D20 rods, with matching PVC cones and rubber seals.

المواصفات

D14 / D15 / D20 rod options
Removable middle section, recovered outer parts
Water stop plate welded or movable, 120×120 or Ø65
PVC cones and rubber seals matched to wall thickness
One-sided or two-sided sealing

اطلب السعر راسلنا واتساب

عرض سعر بمراجعة هندسية خلال 24 ساعة.

المواصفات الفنية

Design	Five-section: outer threaded ends + cones + embedded middle with water stop plate
Water Stop Plate	Welded sheet 120×120mm or round Ø65mm; fixed or movable
Diameter	D14 / D15 / D20
Material	Q235 outer sections, 45# middle and plate
Thread	Rolled thread per DIN 976 / GB/T
Surface	Electro-galvanized or HDG; plate always galvanized
Packaging	Sets with cones, or bulk on seaworthy pallets

المادة45# carbon steel · water stop plate welded at mid-section

المعالجة السطحيةPlain (black) · Electro-galvanized · Hot-dip galvanized

الحمل المقدرD15: 150 kN rated · D20: 230 kN rated

وزن الوحدةD15: 1.5 kg/m · D20: 2.6 kg/m (rod only)

التغليفBundled with matched cones, nuts and PVC accessories · marked per BOM

عملية الإنتاج

**Cutting & forming**Bar cutting, cold heading and plate forming to drawing dimensions.

**CNC thread rolling**Rolled threads for fatigue strength and consistent pitch diameter.

**Heat treatment**Quenching and tempering for class 8.8 and above, with process records.

**Surface treatment**Black oxide, zinc plating or hot-dip galvanizing to the specified thickness.

**Gauge & batch test**Thread gauging, hardness and tensile checks with batch test reports.

**Packing & marking**Set or BOM packing, VCI protection and seaworthy crates.

شرح درجات المواد

الدرجة	ملاحظات
Q235	Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated.
45#	Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8.
40Cr	Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters.
Class 10.9 bolt	Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle.
QT450-10	Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter.
HRB400	Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete.