مجموعة مخروط التسلق

Name: مجموعة مخروط التسلق
Brand: Qianheng Fastener
Availability: InStock

مخروط + جلبة + مثبت لأنظمة التسلق والانزلاق، تفاوت ±0.5 مم.

مباشرة من المصنع

تصنيع CNC داخلي

تقارير دفعات

OEM حسب الرسم

1 / 3

مخاريط التسلق والجلبات

مجموعة مخروط التسلق

High-strength alloy steel cones, heat treated, in standard M24 CF D15 (15mm bar, 28/40mm cone, 100mm length, 30mm hex) and M30 CF D20 (20mm bar, 40/60mm cone, 130mm length, 36mm hex) configurations. Cone angle and sleeve length are customizable and interchangeable with major climbing formwork brands, including Dywidag-style 15/20 systems.

المواصفات

M24 CF D15 and M30 CF D20 standard sets
Alloy steel, heat treated
Cone angle and sleeve length customizable
Interchangeable with major climbing brands
Matched cone, sleeve and screw per set

اطلب السعر راسلنا واتساب

عرض سعر بمراجعة هندسية خلال 24 ساعة.

المواصفات الفنية

Set	M30 CF D20: bar 20mm, cone 40/60mm, length 130mm, hex 36
Material	High-strength alloy steel, heat treated
Install	Hex socket drive (10mm for 15, 13mm square for 20)
Custom	Cone angle, sleeve length and thread on request
Packaging	Matched sets, rust-protected

المادةCone & rod: 45# · Bolt: class 10.9 · Embedded plate & sleeve: QT450-10 ductile iron

المعالجة السطحيةPlain (black) · Zinc plated · Hot-dip galvanized

الحمل المقدر150 kN (M24D15) up to 430 kN (M42D25) — see kit table

وزن الوحدةComplete set: 2.33 kg (M24D15) to 6.85 kg (M42D26.5)

التغليفSet-packed: cone + bolt + rod + plate + sleeve in one unit · marked per set

أطقم المخروط (مخروط + برغي + قضيب + لوح + جلبة)

الطقم	المخروط	البرغي	القضيب	اللوح	الجلبة	الإجمالي	الحمل المقدر
M24D15	M24D15 · 1.02 kg · 45#	M24 × 70 · 0.34 kg · 10.9	D15 × 350 · 0.52 kg · 45#	D15 · 0.45 kg · QT450-10	M24 · QT450-10	2.33 kg	150 kN
M24D20	M24D20 · 1.00 kg · 45#	M24 × 70 · 0.34 kg · 10.9	D20 × 350 · 0.91 kg · 45#	D20 · 0.60 kg · QT450-10	M24 · QT450-10	2.85 kg	230 kN
M30D15	M30D15 · 1.13 kg · 45#	M30 × 80 · 0.62 kg · 10.9	D15 × 350 · 0.52 kg · 45#	D15 · 0.45 kg · QT450-10	M30 · QT450-10	2.72 kg	150 kN
M30D20	M30D20 · 1.10 kg · 45#	M30 × 80 · 0.62 kg · 10.9	D20 × 350 · 0.91 kg · 45#	D20 · 0.60 kg · QT450-10	M30 · QT450-10	3.23 kg	230 kN
M36D20	M36D20 · 1.78 kg · 45#	M36 × 90 · 1.04 kg · 10.9	D20 × 350 · 0.91 kg · 45#	D20 · 0.60 kg · QT450-10	M36 · QT450-10	4.33 kg	230 kN
M36D25	M36D25 · 1.28 kg · 45#	M36 × 90 · 1.04 kg · 10.9	D25 × 400 · 1.64 kg · 45#	D25 · 0.80 kg · QT450-10	M36 · QT450-10	4.76 kg	330 kN
M42D25	M42D25 · 2.60 kg · 45#	M42 × 90 · 1.56 kg · 10.9	D25 × 400 · 1.64 kg · 45#	D25 · 0.80 kg · QT450-10	M42 · QT450-10	6.60 kg	430 kN
M42D26.5	M42D26.5 · 2.60 kg · 45#	M42 × 90 · 1.56 kg · 10.9	D26.5 × 350 · 1.69 kg · 45#	D26.5 · 1.00 kg · QT450-10	M42 · QT450-10	6.85 kg	270 kN

عملية الإنتاج

**Cutting & forming**Bar cutting, cold heading and plate forming to drawing dimensions.

**CNC thread rolling**Rolled threads for fatigue strength and consistent pitch diameter.

**Heat treatment**Quenching and tempering for class 8.8 and above, with process records.

**Surface treatment**Black oxide, zinc plating or hot-dip galvanizing to the specified thickness.

**Gauge & batch test**Thread gauging, hardness and tensile checks with batch test reports.

**Packing & marking**Set or BOM packing, VCI protection and seaworthy crates.

شرح درجات المواد

الدرجة	ملاحظات
Q235	Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated.
45#	Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8.
40Cr	Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters.
Class 10.9 bolt	Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle.
QT450-10	Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter.
HRB400	Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete.