Kait Balok Kayu
Kait penghubung untuk balok kayu H20 dalam formwork dinding dan pelat.
Langsung dari Pabrik
CNC Sendiri
Laporan QC Batch
OEM ke Gambar
1 / 4Aksesori Beam Kayu H20
Kait Balok Kayu
Ductile iron (QT450-10) claw with spring-loaded toothed hook grips the 80mm H20 beam flange while the steel body ties the beam to the panel or waling. No tools required — hook, close and wedge-lock. Reusable, low panel damage and compatible with standard H20 timber beams and Hünnebeck-style wall formwork.
Spesifikasi
- Fits H20 beam flange (80mm)
- QT450-10 ductile iron hook
- Spring-loaded toothed grip
- No-tool wedge lock
- Zinc plated, reusable
Harga diberikan berdasarkan spesifikasi produk, bahan/grade, kuantiti, destinasi dan keadaan pasaran semasa. Hubungi kami untuk penawaran terkini.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Beam Size | H20 timber beam, 80mm flange |
| Material | QT450-10 ductile iron hook + Q235 body |
| Action | Spring-loaded hook + wedge lock |
| Load Rating | System-dependent, up to ~12 kN per claw |
| Finish | Zinc plated |
| Packaging | Bulk in cartons |
Bahan45# steel (quenched and tempered)
Finishing PermukaanPlain (black) · Zinc plated · Quenched (hardened) version available
Beban TerukurGrip force depends on system; rated by beam type — see drawing
Berat UnitD15/10#: 0.55 kg per piece
PengemasanCartons on pallet · marked per BOM
Proses Produksi
01
02
03
04
05
06Jelaskan Grade Bahan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Confirm beam flange width (80mm standard H20) before ordering
- Check panel hole spacing matches your claw layout
- Order spares for on-site loss — claws are lightweight
- For outdoor sites, request HDG or higher zinc class
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pengiriman
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikat tali + tahan air
- Pembayaran
- T/T · L/C saat tiba
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
Soalan Teknikal Lazim
Kait Balok Kayu — Jawapan untuk Jurutera dan Pembeli
A formwork tie rod is a high-strength threaded bar that, together with nuts, anchor plates and walers, holds formwork panels against the lateral pressure of fresh concrete. It passes through the wall section and is either fully recovered after stripping (through-tie used with a sleeve) or permanently embedded (lost-end / water-stop type).