Clamp Penyesuaian BFD (Ditebuk, Kecil)
Klip BFD ditebuk kompak untuk sambungan tepi, sudut dalaman dan panel pendek.
Langsung dari Pabrik
CNC Sendiri
Laporan QC Batch
OEM ke Gambar
1 / 1Baut Terbenam dan Bagian Terbenam
Clamp Penyesuaian BFD (Ditebuk, Kecil)
Same male-and-female wedge locking construction as the large stamped wedge clamp, but smaller and lighter for identical duty — ideal for narrow positions such as edge beams, internal corners and panel frames.
Spesifikasi
- Same wedge locking construction as the large size
- Smaller and lighter for identical duty
- For narrow positions: edge beams, internal corners, panel frames
- Custom sizes to drawing
Harga diberikan berdasarkan spesifikasi produk, bahan/grade, kuantiti, destinasi dan keadaan pasaran semasa. Hubungi kami untuk penawaran terkini.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Material | Pressed steel plate |
| Surface | Plain (black) · Zinc plated · Hot-dip galvanized |
| Process | Stamping / casting · Machining · Surface treatment · Gauge inspection · Packing |
| Size | Standard sizes plus custom to drawing |
| Packaging | Cartons on pallet · marked per BOM |
BahanPressed steel plate
Finishing PermukaanPlain (black) · Zinc plated · Hot-dip galvanized · Painted
Beban TerukurClamping / locking part — capacity confirmed per drawing and batch test
Berat UnitOn request (part weight depends on size and drawing)
PengemasanCartons on pallet · marked per BOM
Proses Produksi
01
02
03
04
05
06Jelaskan Grade Bahan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Confirm the panel, beam or column system and the required clamping range
- Send your drawing or a sample for custom sizes, hole patterns and finishes
- Ask for batch inspection records and surface finish spec with the quotation
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pengiriman
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikat tali + tahan air
- Pembayaran
- T/T · L/C saat tiba
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
Soalan Teknikal Lazim
Clamp Penyesuaian BFD (Ditebuk, Kecil) — Jawapan untuk Jurutera dan Pembeli
It consists of two reusable outer threaded bars, two plastic cones and one embedded middle bar with a welded water-stop plate. After stripping, the two outer bars are unscrewed and reused on the next pour; only the middle section stays inside the wall. This keeps consumable cost low while producing a watertight wall penetration.