Double-Lug Disc Nut

Name: Double-Lug Disc Nut
Brand: Qianheng Fastener
Availability: InStock

Two-lug disc nut for hand tightening and fast tie rod assembly.

مباشرة من المصنع

تصنيع CNC داخلي

تقارير دفعات

OEM حسب الرسم

1 / 3

صواميل وقرصات وملحقات

Double-Lug Disc Nut

A pressed steel disc nut with two ears for tool-free hand tightening. The two lugs give extra leverage on site and make assembly faster; the disc face spreads load against the waler or panel. Used with D15 / D20 formwork tie rods.

المواصفات

Two-lug pressed steel construction
Fits D15 / D20 tie rod threads
Hand-tight leverage without tools
Pairs with waler and panel clamping

اطلب السعر راسلنا واتساب

عرض سعر بمراجعة هندسية خلال 24 ساعة.

المواصفات الفنية

Thread	D15 / D20
Material	45# steel
Surface	Zinc plated / black

المادة45# steel

المعالجة السطحيةZinc plated · Black

الحمل المقدرMatched to tie rod class (Inquire)

وزن الوحدةInquire

التغليفCartons on pallet · marked

أوزان الملحقات

الاسم	المقاس	الوزن	المادة	المعالجة
Tie rod (high strength)	D15 × 1000	1.5 kg	Q235 · 45# · 40Cr	Black / zinc / HDG
Tie rod (high strength)	D20 × 1000	2.6 kg	Q235 · 45# · 40Cr	Black / zinc / HDG
Tie rod section	D15 × 250	0.375 kg	45#	Black / zinc
Wing nut (shanxing nut)	D15	0.32 kg	45# / QT450-10	Black / zinc
Wing nut (shanxing nut)	D20	0.8 kg	45# / QT450-10	Black / zinc
Connecting nut	D20 × 110	0.8 kg	QT450-10 / 45#	Zinc plated
Disc nut	D20 × 50 × 110	0.92 kg	QT450-10	Black / zinc
Disc (round plate)	D15 × 100	0.53 kg	Q235 / 45#	Black
Square washer	120 × 120	0.98 kg	Q235	Black / zinc
Channel washer	60 × 140	0.7 kg	Q235 / 45#	Black
Embedded plate	D20 × 67 × 96	0.6 kg	QT450-10	Black / zinc
Cone (climbing)	D20 × 33 × 59 × 110	0.93 kg	45#	Black / zinc
Waler fastener (backing plank clip)	D15 / 10#	0.55 kg	45#	Black / quenched version
Embedded foot bolt (single-sided)	D25 × 700	2.4 kg	HRB400 ribbed bar	Black / zinc
Hex nut	D15 / across-flats 23-25	—	45#	Black / zinc
Hex nut (tall)	D15 / height 37 / AF 25	—	45#	Black / zinc
Hex nut	D15 / across-flats 50-25	—	45#	Black / zinc
Hex nut	D20 / across-flats 23-31	—	45#	Black / zinc
Hex nut	D20 / across-flats 50-32	—	45#	Black / zinc

عملية الإنتاج

**Cutting & forming**Bar cutting, cold heading and plate forming to drawing dimensions.

**CNC thread rolling**Rolled threads for fatigue strength and consistent pitch diameter.

**Heat treatment**Quenching and tempering for class 8.8 and above, with process records.

**Surface treatment**Black oxide, zinc plating or hot-dip galvanizing to the specified thickness.

**Gauge & batch test**Thread gauging, hardness and tensile checks with batch test reports.

**Packing & marking**Set or BOM packing, VCI protection and seaworthy crates.

شرح درجات المواد

الدرجة	ملاحظات
Q235	Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated.
45#	Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8.
40Cr	Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters.
Class 10.9 bolt	Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle.
QT450-10	Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter.
HRB400	Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete.