Mur Penghenti Air dari Besi Cor
Mur dari besi cor dengan fungsi penghenti air untuk sistem batang pengikat kedap air.
Langsung dari Pabrik
CNC Dalam Pabrik
Laporan Pengujian Batch
OEM Berdasarkan Gambar
1 / 4Baut Pengikat dengan Kepala
Mur Penghenti Air dari Besi Cor
A cast iron nut with an integral water stop for watertight tie rod systems in basements and water-retaining structures. Pairs with water stop tie rods and plates.
Spesifikasi
- Cast iron construction
- Water stop function
- Fits D15 / D20 threads
- For watertight tie systems
Harga ditawarkan berdasarkan spesifikasi produk, material/grade, jumlah, tujuan, dan kondisi pasar saat ini. Hubungi kami untuk penawaran terbaru.
Penawaran yang ditinjau oleh insinyur dalam 24 jam.
Spesifikasi Teknis
| Thread | D15 / D20 |
| Material | Cast iron |
| Surface | Black / zinc plated |
BahanCast iron (HT / QT)
Finishing PermukaanBlack · Zinc plated
Beban TerukurInquire
Berat UnitInquire
PengemasanCartons on pallet
Proses Produksi
01
02
03
04
05
06Jenis Bahan Dijelaskan
| Grade | Catatan |
|---|---|
| Q235 | Plain carbon steel. Economic option for light and medium formwork loads. Not heat treated. |
| 45# | Medium carbon steel. The standard formwork tie rod grade in China; quenchable to class 8.8. |
| 40Cr | Alloy steel. Higher hardenability and better fatigue performance than 45#; used where repeated reuse matters. |
| Class 10.9 bolt | Quenched and tempered alloy steel bolt used in the climbing cone set. Not electroplated without a documented baking cycle. |
| QT450-10 | Ductile (nodular) iron with 450 MPa tensile and 10% elongation. Used for sleeves and embedded plates where toughness and castability matter. |
| HRB400 | Hot-rolled ribbed bar (threaded steel) to Chinese standard. Used for embedded foot bolts; good bond with concrete. |
Aplikasi
Panduan Pembelian
- Confirm thread size
- Specify water stop requirement
Informasi Pembelian
- OEM / Kustom
- Gambar atau label sendiri diterima
- MOQ
- Pesanan percobaan OK · SKU campuran diterima
- Waktu Pemesanan
- Stok 3 hari · Kustom 7-15 hari
- Pengemasan
- Tahan Laut: palet + ikatan + tahan air
- Pembayaran
- T/T · L/C saat ini
- Incoterms
- FOB Tianjin · CIF · CFR · EXW
Produk Terkait
FAQ Teknis
Mur Penghenti Air dari Besi Cor — Jawaban untuk Insinyur dan Pembeli
It consists of two reusable outer threaded bars, two plastic cones and one embedded middle bar with a welded water-stop plate. After stripping, the two outer bars are unscrewed and reused on the next pour; only the middle section stays inside the wall. This keeps consumable cost low while producing a watertight wall penetration.